Easy Wind

Usually the hot and humid air is concentrated in the top space of the greenhouse. The current ventilation method cannot eliminate the hot and humid air, which causes the breeding of many bacteria and germs, and brings many diseases to the growth of crops. The Easy Wind can effectively solve this problem.

Product Details

instruction

Usually the hot and humid air is concentrated in the top space of the greenhouse. The current ventilation method cannot eliminate the hot and humid air, which causes the breeding of many bacteria and germs, and brings many diseases to the growth of crops. The Easy Wind can effectively solve this problem.


Specification:

Easy wind manual

Easy wind automatic

Control modemanualControl modeelectric
Outlet diameter410mmBlast capacity4600m³/h
Installation position527mm

Blade diameter

390mm
Height280mmRotate speed1390r/min
Weight2.3kgFrequency50Hz
Quality guarantee3 yearsVoltage220V


Electricity0.9A


Power200W


Weight9kg


Quality guarantee3 years



Advantage

* Good effect of dehumidification, ventilation and cooling

The Easy Wind can be installed at the top of the greenhouse. You can choose manual mode or electric mode. It speeds up the discharge of excess heat and inhibits high temperatures. It can help the greenhouse water vapor discharge and reduce indoor air temperature. The ventilation capacity is 4,600 cubic meters per hour. It can quickly dehumidify and cool the greenhouse. Humidity can be reduced by about 15% on average. It could promote indoor air flow, promote gas exchange in plant community, and make environmental factors tend to be uniform, thus reducing the occurrence of diseases and insect pests. Easy Wind can also supplement carbon dioxide, to maintain the necessary concentration of carbon dioxide in the greenhouse, conducive to the normal growth of plants.

Good sealing performance with Leakproof design

Because the material of Easy Wind is close to the film, no chemical reaction will occur between the Easy Window and the film. The thermal expansion rate is the same, so that the wall of Easy Wind and the film are naturally attached and will not leak rain. Open the hood at the beginning of the work to complete the ventilation work. When the ventilation is stopped, after disconnecting the power supply of the fan, the end cap will fall naturally by its own weight. The hood is closed, overlapping with the Easy Wind wall and tightly closed. It can prevent heat loss, prevent outdoor wind backflow, prevent rain and snow entering indoor, effectively ensuring sealing and use safety.

Anti-aging and durable

The material is PE and anti-aging agent is added to improve the anti-aging effect.

Easy to install and firm

It is made of light plastic. It is compact, small in size and light in weight. One person can easily complete the installation, save time and effort to reduce labor intensity.

* Low noise, stable operation, low energy consumption

The motor power is only 200W, but the air flow can reach 460m³/h

* Widely used in various kinds of greenhouses

It can be used for the ventilation of various kinds of greenhouses, such as tunnel greenhouse, multi-span film greenhouse, solar greenhouse, PC sheet greenhouse, glass greenhouse, greenhouse restaurant.


We offer customized Easy Wind of high performance, so if you are going to wholesale Easy Wind from one of the best such suppliers in China, please call us or directly contact us online.

公司介绍-1

公司介绍-2

公司介绍-3

公司介绍-4




Contact Us:

Address: 7th Floor, Advanced Material Building, No.7 Feng Hui Zhong Lu, Haidian District, Beijing, China

Tel: 0086-10-58711536

Fax: 0086-10-58711560

Email: info@chinakingpeng.com

Web: www.chinakingpeng.com   www.kingpengintl.com www.jingpeng.cn





 

                                                                                            



Hot Tags: easy wind China, manufacturers, suppliers, customized

Inquiry

You Might Also Like